• XEC-207-8

    Empty Container Handler

    XEC-207-8 20,000lb Capacity Container Handler

  • Container Handler Cab

    Taylor Cab

HEAVY DUTY CONTAINER HANDLER - EMPTY CONTAINER HANDLERS

Description

15,000-lb. and 20,000-lb. Capacity
Depending on model

Taylor Machine Works has designed, built, and marketed empty container handlers since 1976. "Big Red" empty-container handlers reflect that experience and knowledge gained during those years. Our empty container handlers are "All American," designed and built in the USA, We strive to stay on the cutting edge of industrial technology, always committed to designing and building the best, most productive, most dependable container handling equipment in the world.

Features include: Taylor Made Spreader, Wide stance drive axle, End User Diagnostics, Joystick Controls, Heavy Duty Lift Chains, Enclosed All-Steel Operator Cab, Super Heavy Duty Hydraulic and Engine Cooling System, Heaviest built steer axle in the industry and standard LED lights.

Taylor's empty container handlers are equiped with a wide assortment of masts and attachments to better meet your particular need. The following lists the standard mast and attachment by model.

Empty Container Handlers | Up to 8 High!

XEC-155/6

Basic Truck Includes

  • Cummins QSB6.7-C173 HP Tier 4 Final Diesel Engine
  • Engine Equipped With Fuel / Water Separator
  • Donaldson Dry-type Air Cleaner w/Safety Element & Restriction Indicator
  • Muffler w/Stack Guard standard with Cummins Tier 4 Engines, optional with Tier 3 Engines
  • Dana TC-32 3 speed powershift transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-81 Planetary Drive Axle with Wet Disc Brakes
  • Taylor welded steel steer axle (single hydraulic cylinder design with heavy duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 12.00 x 20 - 24 PR bias pneumatic drive and steer tires
  • Taylor Integrated Control System (TICS) with CANbus Technology with Diagnostics, through dash mounted 7 " diagonal full color touch screen display, Seat Belt Sequence Neutral Lock, Customer Ability to turn Accessory Functions On/Off, Power on Demand, Idle and Neutral Shutdown
  • Two Heavy-duty Batteries with Battery Disconnect Switch
  • 24-Volt Electrical System with 95 Amp Alternator and Reset Circuit Breakers
  • LED worklights total 10, 2 at front on each side of cab, total 4, 2 rear facing mounted on back of cab, 2 front on mast, one low and one high and 1 On Either End of Attachment set for Twist Locks,
  • In cab amber, green and red signal light system for twistlock operation, with additional set on TICS display
  • Dual USB port in cab
  • Lighted Instruments
  • Step Lights, Two
  • Hour Meter Mounted in Engine Compartment
  • Electric Horn 118 Dba
  • Keyswitch-actuated Amber Strobe Light
  • Reverse-actuated backup alarm
  • Forward actuated forward alarm
  • Anti-restart Ignition Switch
  • Seat Belt Sequence Neutral Lock
  • Right Arm Rest Mounted Electric Joystick Operated Controls and Switch Controls,can be Adjusted to fit Operator
  • Elevated Center, Rear Mount Operator, ANSI B56.1 FOPS Overhead Guard /Cab, 2 Full size doors, includes one 32,000 BTU heater, one circulation fan, front and rear windshield wipers with control switch's, front windshield washer, dome light, all glass tinted, door hold back latches with trip buttons
  • Adjustable vinyl covered air ride suspension seat w/flip-down, adjustable-angle arm rests, and can be adjusted to fit operator, has left 15/ right 20 degree rotation
  • Orange Seat Belt and OPS Switch seat
  • Cab color black only
  • Tilt Steering Wheel with forward, reverse, and neutral transmission roll shifter
  • Rear View Convex Mirrors in Cab and on Chassis
  • All welded Chassis, with Bolt-On Fuel and Hydraulic Tanks
  • 24 volt electrical system with 95 amp alternator
  • Auxiliary Drive Line Mounted Parking Brake mounted on Transmission
  • Remote mounted hydraulic oil cooler
  • Hydrostatic Power Steering
  • 87 Gallon all welded hydraulic tank
  • Full Flow Wire Mesh Strainers and 10 Micron Return Line Filters w/Replaceable Elements in Tank
  • Parker Hydraulic Gear Type Pumps, fittings, hoses
  • Accumulator in Lift Circuit
  • 45' ULTRA-VU Telescopic Mast for stacking 5 high 9'6" empty containers and 6 high 8'6" empty containers
  • 2040 ISO Container Handler Side Post Attachment with side shift, mechanical pile slope, and guide arms, all major replacement parts external mounted
15,000lb
CAPACITY
100"
LOAD CENTER
150"
WHEELBASE



XECDS 155/6

Basic Truck Includes

  • Cummins QSB6.7-C225 HP Tier 4 Final Diesel Engine
  • Engine Equipped With Fuel / Water Separator
  • Donaldson Dry-type Air Cleaner w/Safety Element & Restriction Indicator
  • Muffler w/Stack Guard standard with Cummins Tier 4 Engines, optional with Tier 3 Engines
  • Dana TC-32 3 speed powershift transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-81 Planetary Drive Axle with Wet Disc Brakes
  • Taylor welded steel steer axle (single hydraulic cylinder design with heavy duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 12.00 x 20 - 24 PR bias pneumatic drive and steer tires
  • Taylor Integrated Control System (TICS) with CANbus Technology with Diagnostics, through dash mounted 7 " diagonal full color touch screen display, Seat Belt Sequence Neutral Lock, Customer Ability to turn Accessory Functions On/Off, Power on Demand, Idle and Neutral Shutdown
  • Two Heavy-duty Batteries with Battery Disconnect Switch
  • 24-Volt Electrical System with 95 Amp Alternator and Reset Circuit Breakers
  • LED worklights total 10, 2 at front on each side of cab, total 4, 2 rear facing mounted on back of cab, 2 front on mast, one low and one high and 1 On Either End of Attachment set for Twist Locks,
  • In cab amber, green and red signal light system for twistlock operation, with additional set on TICS display
  • Dual USB port in cab
  • Lighted Instruments
  • Step Lights, Two
  • Hour Meter Mounted in Engine Compartment
  • Electric Horn 118 Dba
  • Keyswitch-actuated Amber Strobe Light
  • Reverse-actuated backup alarm
  • Forward actuated forward alarm
  • Anti-restart Ignition Switch
  • Seat Belt Sequence Neutral Lock
  • Right Arm Rest Mounted Electric Joystick Operated Controls and Switch Controls,can be Adjusted to fit Operator
  • Elevated Center, Rear Mount Operator, ANSI B56.1 FOPS Overhead Guard /Cab, 2 Full size doors, includes one 32,000 BTU heater, one circulation fan, front and rear windshield wipers with control switch's, front windshield washer, dome light, all glass tinted, door hold back latches with trip buttons
  • Adjustable vinyl covered air ride suspension seat w/flip-down, adjustable-angle arm rests, and can be adjusted to fit operator, has left 15/ right 20 degree rotation
  • Orange Seat Belt and OPS Switch seat
  • Cab color black only
  • Tilt Steering Wheel with forward, reverse, and neutral transmission roll shifter
  • Rear View Convex Mirrors in Cab and on Chassis
  • All welded Chassis, with Bolt-On Fuel and Hydraulic Tanks
  • 24 volt electrical system with 95 amp alternator
  • Auxiliary Drive Line Mounted Parking Brake mounted on Transmission
  • Remote mounted hydraulic oil cooler
  • Hydrostatic Power Steering
  • 87 Gallon all welded hydraulic tank
  • Full Flow Wire Mesh Strainers and 10 Micron Return Line Filters w/Replaceable Elements in Tank
  • Parker Hydraulic Gear Type Pumps, fittings, hoses
  • Accumulator in Lift Circuit
  • 45' ULTRA-VU Telescopic Mast for stacking 5 high 9'6" empty containers and 6 high 8'6" empty containers
  • 2040 ISO Container Handler Side Post Attachment with side shift, mechanical pile slope, and guide arms, all major replacement parts external mounted
15,000lbs
CAPACITY
100.25"
LOAD CENTER
180"
WHEELBASE



XEC-205/6

Standard Features:

  • 45' ULTRA-VIEW Teloscopic Mast for stacking 5-High (9’ 6” Empty) & 6-High (8' 6" Empty)
  • Side Pick 20-40 ISO Container Handling Attachment, Integrated into the Side Shift Carriage(24" each direction). Features guide arms, mechanical pile slope & twistlock safety interlock system.
  • Accumulator in Lift Circuit
  • Cummins QSB6.7L 225-HP Tier 4-Final Diesel (Turbocharged)
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana TC-32 3-speed powershift transmission
  • Powertrain Protection System for engine and transmission
  • Axletech PRC1756W HD planetary drive axle with wet disc brakes
  • Taylor 310 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 14.00 X 24 – 20PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Dual side engine bay doors (both sides of machine), and removable deck plates open to expose drive train for ease of maintenance.

Cab

  • Enclosed, elevated operator, 2-door all-welded steel center mount cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction joystick mounted on adjustable arm rest
  • Roll shift directional control (column mounted)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • 2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on container attachment)
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights (cab mounted)
  • (2) LED work lights (mast mounted)
  • (2) LED work lights (twistlock mounted)
  • (2) LED step lights
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Air Horn with 2-gal air tank (126 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

VIP

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
20,000lb
CAPACITY
103"
LOAD CENTER
180"
WHEELBASE



XEC-206/7

Standard Features:

  • 54' 6" ULTRA-VIEW Teloscopic Mast for stacking 6-High (9’ 6” Empty) & 7-High (8' 6" Empty)
  • Side Pick 20-40 ISO Container Handling Attachment, Integrated into the Side Shift Carriage(24" each direction). Features guide arms, mechanical pile slope & twistlock safety interlock system.
  • Accumulator in Lift Circuit
  • Cummins QSB6.7L 225-HP Tier 4-Final Diesel (Turbocharged)
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana TC-32 3-speed powershift transmission
  • Powertrain Protection System for engine and transmission
  • Axletech PRC1756W HD planetary drive axle with wet disc brakes
  • Taylor 310 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 14.00 X 24 – 20PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Dual side engine bay doors (both sides of machine), and removable deck plates open to expose drive train for ease of maintenance.

Cab

  • Enclosed, elevated operator, 2-door all-welded steel center mount cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction joystick mounted on adjustable arm rest
  • Roll shift directional control (column mounted)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • 2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on container attachment)
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights (cab mounted)
  • (2) LED work lights (mast mounted)
  • (2) LED work lights (twistlock mounted)
  • (2) LED step lights
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Air Horn with 2-gal air tank (126 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

VIP

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
20,000lb
CAPACITY
103"
LOAD CENTER
180"
WHEELBASE



XEC-207/8

Standard Features:

  • 63' ULTRA-VIEW Teloscopic Mast for stacking 7-High (9’ 6” Empty) & 8-High (8' 6" Empty)
  • Side Pick 20-40 ISO Container Handling Attachment, Integrated into the Side Shift Carriage(24" each direction). Features guide arms, mechanical pile slope & twistlock safety interlock system.
  • Accumulator in Lift Circuit
  • Cummins QSB6.7L 225-HP Tier 4-Final Diesel (Turbocharged)
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana TC-32 3-speed powershift transmission
  • Powertrain Protection System for engine and transmission
  • Axletech PRC1756W HD planetary drive axle with wet disc brakes
  • Taylor 310 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 14.00 X 24 – 20PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Dual side engine bay doors (both sides of machine), and removable deck plates open to expose drive train for ease of maintenance.

Cab

  • Enclosed, elevated operator, 2-door all-welded steel center mount cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction joystick mounted on adjustable arm rest
  • Roll shift directional control (column mounted)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • 2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on container attachment)
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights (cab mounted)
  • (2) LED work lights (mast mounted)
  • (2) LED work lights (twistlock mounted)
  • (2) LED step lights
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Air Horn with 2-gal air tank (126 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

VIP

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video
20,000lb
CAPACITY
103"
LOAD CENTER
180"
WHEELBASE