Carriage Groups 100-in standard (TX-400M thru TX-550M) 120-in standard (TX-650S thru TX-700L) Simple design- • bolt-on housing • Timken tapered roller bearings • cast nylon side thrust pads • shims, if necessary Minimal maintenance with more resistant to dynamic/shock loads with rough terrain, high lift, and/or offset loads 48-in. Load Center Machines Lift with Confidence The TX Series features the most dependable and diverse assortment of mast and carriages in its class. Known for their innovative design, these masts give you the confidence in knowing it will work every time you need it. Even when maintenance is required you can feel safe knowing our engineers have designed our mast and carriages to be as easy to maintain and repair as possible. The telescopic, ULTRA-VU mast features a nested channel construction. The double-acting lift cylinders are positioned to the rear of the mast rails while the multi-leaf lift chains are nested inside the mast rails of the TX-400S through TX-700L models. Two lifting eyes and bolt-on caps permit safe, easy removal of the mast in the event that repair is needed. The pin-mounted forks are hammer forged from heat treated steel with increased thickness in critical heel sections. The forks are fully adjustable from full width of carriage to +/-2-in. Lengths and widths vary depending on your particular needs and model type. The mast and carriage main rollers are common and use Timken® tapered roller bearings. Chain rollers use sealed ball bearings. Common, cast nylon, side thrust pads are adjustable to compensate for wear. Wide stance for more stable and confident handling The TX Series of 36-in & 48-in L.C. lift trucks can boast 10 models to choose from, with lift capacities ranging from 40,000-lbs to 70,000-lbs.