XLC976 Brochure

12 LED Work /Step Lights (Standard) Vehicle Information Package (Standard) Fully Adjustable Air Ride Seat (Standard) Industry’s Toughest Steer Axle (Standard) Fully Enclosed 2-door Cab - All Steel - 32,000 BTU Heater (Standard) Just ask one of our Taylor Specialist. Taylor Machine Works was founded on the promise of meeting our customer’s needs. The signage on our original facility in 1927 stated “We Engineer and Build What You Need” and those ideals still ring true today! From multiple Mast, Carriage and Fork configurations to Special Attachments that are unique to your business, we will step forward to meet the challenge. We have a dedicated engineering group focused on meeting special request from our customers. This ensures that you have the exact equipment you need to tackle your rugged applications. With hundreds of options readily available for our trucks, and the ability to custom engineer any other need that arises, Taylor Machine Works is here ready to serve. Need Options? The mast and carriage main rollers are common and use tapered roller bearings. The side thrust pads, made from cast nylon, are adjustable to compensate for wear. Standard Features - XLC-976 Ÿ 51’ 6” ULTRA-VIEW Teloscopic Mast for stacking 6-High (9’ 6” Loaded) Ÿ 20-40 ISO Container Handling Attachment, Chain Suspended, with reach, slew, side shift, guide arms and mechanical pile slope Ÿ Accumulator in Lift Circuit Ÿ Volvo 12.8L TAD1371VE 388-HP Tier 4-Final Diesel (Turbocharged) Ÿ Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension with TaylorMax Precleaner) Ÿ Dana TE-32 4-speed powershift transmission Ÿ Powertrain protection system for engine and transmission Ÿ Kessler D-102W HD planetary drive axle with wet disc brakes Ÿ Taylor HD-600 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles) Ÿ Solid plate steer angle limitation (more contact area than bolt heads which require adjustment) 18.00 X 25 – 40PR bias pneumatic drive and steer tires CHASSIS: Ÿ All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick) Ÿ Integral counterweight Ÿ Replaceable bolt-on steps and handrails Ÿ Lockable Fuel Cap Ÿ Dual side engine bay doors (both sides of machine), and removable deck plates open to expose drive train for ease of maintenance. CAB: Ÿ Enclosed, elevated operator, 2-door all-welded steel center mount cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction) Ÿ 10-degree cab tilt (can be turned off to suit operator preference) Ÿ 32,000 BTU heater and interior circulation fan Ÿ Tinted glass with front and rear windshield wipers and front windshield washer Ÿ Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right) Ÿ Multifunction joystick mounted on adjustable arm rest Ÿ Roll shift directional control (column mounted) Ÿ Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock) Ÿ Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user) Ÿ Taylor Integrated Control System (TICS) …see next page for additional info Ÿ 7-in touch screen color display Ÿ The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty Ÿ accessories. Ÿ All wiring is color and number coded. Ÿ Dual USB charging ports Hydrostatic, steer-on-demand power steering with tilt steering column ELECTRICAL: Ÿ 24-volt electrical system with 110 amp alternator Ÿ Dual heavy-duty batteries Ÿ Battery disconnect/lock-out switch Ÿ 2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on container attachment) Ÿ (4) forward facing LED work lights (cab mounted) Ÿ (2) rear facing LED work lights (“A” pillar mounted) Ÿ (2) LED work lights (mast mounted) Ÿ (2) LED work lights (twistlock mounted) Ÿ (2) LED step lights Ÿ Circuit breakers with heavy duty connectors (no automotive type fuses) Ÿ Breaker reset switches Ÿ Key-type anti-restart ignition switch Ÿ Air Horn with 2-gal air tank (126 dBA) Ÿ Keyswitch-actuated amber strobe light Forward and reverse-actuated warning alarms VIP: Ÿ Operators Guide Ÿ Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request) Ÿ Safety Check Manual and Video

RkJQdWJsaXNoZXIy NjE3NTA=