30,000 lb / 14t

Taylor TX4-300 Details
Purpose Built Articulated 4WD Forklift


The TX4-300 Articulated 4WD Forklift is specifically designed for one task: moving material in the harshest environments imaginable. Whether its snow, mud, or rough terrain - the TX4-300 deliver unparalleled performance.

Basic Truck Includes

  • Cummins QSB6.7-C160 Tier III Diesel Engine
  • Muffler w/Stack Guard
  • Dry-type Air Cleaner w/Safety Element & Restriction Indicator and Vertical Air Intake Extension
  • Ultra-VU 11' Mast
  • 84" Wide Type "C" Carriage
  • 12-Volt Electrical System; 130 Amp Alternator & Circuit Breakers
  • Taylor Integrated Control System (TICS) with CANbus Technology with Diagnostics through dash mounted display
  • Anti-restart Ignition Switch
  • Tilt Steering
  • Heavy-duty Battery with battery disconnect switch
  • Lighted Instruments
  • Remote mounted hour meter gauge
  • Electric Horn 118 Dba
  • Keyswitch-actuated Amber Strobe Light
  • Reverse-actuated Backup Alarm
  • Forward actuated forward alarm
  • Four work lights, 2 front mast mounted: 2 rear cab mounted with one control switch
  • Rear view convex mirrors inside of the cab
  • Powershift Transmission - 4 speed w/Inching, Modulated, Electric Shift Control, Air/Oil Cooling with Automatic Powershift Control
  • All welded chassis
  • Front and Rear Bolted Planetary Drive Axles and Positive Rim Mountings
  • Front and Rear Air Cooled Wet Disc Brakes Hydraulic Actuated with Cooler for Brake Oil and Hydraulic Oil
  • Hydrostatic Power Steering
  • 5 Section Hydraulic Valve standard
  • Up front center mount cab, 2-door, includes one 32,000 BTU heater, one circulation fan, front and rear windshield wipers with control switch, front windshield washer, dome light, all glass tinted
  • Door hold back latches with trip button, grey insulation, and black floor mat inside cab. Cab color black only.
  • Adjustable Black Vinyl Covered Air Suspension Seat w/Arm Rests, Orange Seat Belt and OPS Switch, Seat has 15/20 degree rotation
  • Full Flow Wire Mesh Suction Strainers & Full Flow 10-Micron Return Filter in Tank


This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.