20,000 lb / 9t

Taylor TXB-200S Details


Taylor Machine Works' TXB Series rough terrain forklifts are the most durable, most powerful, and the most maneuverable high-capacity rough terrain forklifts available to the wood products industry. Taylor Machine Works is the only USA manufacturer who designs and builds rough terrain forklifts with 18,000 to 36,000-lb rated capacities. Note: The TXB series is currently being phased out and replaced with the new Tier 4F XB series. Contact your local dealer for TXB availability.

Basic Truck Includes

  • Cummins QSB6.7-C160 HP Tier III Diesel Engine
  • Engine and transmission protection system.
  • Lockable Fuel Cap w/Strainer, fuel gauge
  • Dry-type Air Cleaner w/Safety Element & Restriction Indicator and Vertical Air Intake Extension
  • Muffler w/Stack Guard
  • 12-Volt Electrical System; 130 Amp Alternator & Circuit Breakers
  • 11-ft. Ultra-Vu Mast
  • 84-in. Wide Type "C" carriage
  • Taylor Integrated Control System (TICS) with CANbus Technology with Diagnostics through dash mounted display
  • Anti-restart Ignition Switch
  • Tilt Steering Wheel
  • Heavy-duty Battery with battery and battery disconnect switch
  • Lighted Instruments
  • Remote mounted hour meter gauge
  • Electric Horn 116 Dba
  • Keyswitch-actuated Amber Strobe Light
  • Reverse-actuated Backup Alarm
  • Forward actuated forward alarm
  • Four work lights, 2 front mast mounted: 2 rear A frame mounted with one control switch
  • Rear View Mirrors
  • Powershift Transmission - 3 speed w/Inching, Modulated, Electric Shift Control, Air/Oil Cooling with Automatic Powershift Control with direction controls on push buttons on joystick
  • All welded chassis, lift eyes, 2 mast mounted, 2 chassis mounted, not level pick
  • Taylor Steer Axle
  • Bolted Planetary Drive Axle and Positive Rim Mountings
  • Air Cooled Wet Disc Brakes Hydraulic Actuated with Cooler for Brake Oil and Hydraulic Oil
  • Auxiliary Drive Line Mounted Parking Brake
  • Hydrostatic Power Steering
  • 5 Section Hydraulic Valve standard
  • Electric joystick operated controls and switch controls
  • Up front center mount cab, 2-door, includes one 32,000 BTU heater, one circulation fan, front and rear windshield wipers with control switches, dome light, all glass tinted
  • Door hold back latches with trip button, grey insulation, and black floor mat inside cab. Cab color black only.
  • Adjustable Black Vinyl Covered Air Suspension Seat w/Arm Rests, Orange Seat Belt and OPS Switch, Seat has left 15/ right 20 degree rotation
  • Full Flow Wire Mesh Suction Strainers & Full Flow 10-Micron Return Filter in Tank
  • Parker hydraulic gear type pumps, fittings and hoses


This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.