90k-99k lb / 41-45t
CAPACITYCAP.
N/A"
LOAD CENTERL.C.
258"
WHEELBASEW/B

Taylor XRS-9972 Details
Purpose Built Reach Stacker

Description:

The Taylor XRS-9972 Reachstacker is designed to handle Loaded Containers stacked up to 99,000-lbs / 5-High first row, 90,400-lbs / 4-High second row and 3-High third row. This truck features a Heavy Duty Taylor designed Top-pick 4-point spreader with up to 185 degree rotation, hydraulic cab positioning, 388 HP Tier 4 Final diesel engine, and End-User diagnostics that allow the customer to customize operating parameters and troubleshoot most codes without the need for a service call. The Taylor Big Red Reachstacker is a versatile machine that can be configured to handle containers, breakbulk, steel coil, magnet attachments and much more. Taylor Big Red... Engineering the Ultimate Lifttruck!

Standard Features

  • Telescopic Boom for stacking 5-High 1st row, 4-High 2nd row and 3-High 3rd row. (9-ft. 6-in. Loaded)
  • 20-40 ISO Container Handling Attachment, with rotation, side shift, expansion/retraction and damping
  • Accumulator in Lift Circuit
  • Volvo 12.8L TAD1371VE 388-HP Tier 4-Final Diesel (Turbocharged)
  • Fuel/Water separator
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (with TaylorMax Precleaner)
  • Dana TE-32 4-speed powershift transmission
  • Powertrain protection system for engine and transmission
  • Kessler D-102W HD planetary drive axle with wet disc brakes
  • Taylor 800 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than typical bolt head)

Chassis

  • All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
  • Integral counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Removable deck plates open to expose drive train for ease of maintenance

Cab

  • Climate Controlled sliding (hydraulic/electric) all-welded steel center mount cab (includes right hand and left hand access doors,with rear exit window and dome light)
  • 66,000 BTU total heating with front and rear defrosting, cab pressurizer and fresh air intake
  • 40,000 BTU air conditioning and two circulation fans
  • Exterior Cab Positioning Switch allows the cab to be moved while the machine is powered down
  • Tinted glass with front, rear, and top windshield wipers
  • Front and Top windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction joystick, with integrated directional shift control, mounted on adjustable arm rest
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • Rear visibility aid camera system
  • The 2-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color and number coded.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 110 amp alternator
  • Dual heavy-duty batteries
  • Dual Battery disconnect/lock-out switch
  • 2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on boom)
  • (4) Chassis mounted LED work lights
  • (4) Boom mounted LED work lights
  • (2) Dedicated Twistlock LED work lights
  • (2) LED step lights
  • Stop-Tail-Turn Lights
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Keyswitch-actuated push button start
  • Air Horn with 2-gal air tank (126 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

DISCLAIMER:

This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.